dmesg - A4-3305M Encoding
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-12-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=/dev/sda3 ro vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfb3f000 (usable)
[ 0.000000] BIOS-e820: 00000000bfb3f000 - 00000000bfbbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfbbf000 - 00000000bfebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfebf000 - 00000000bfef5000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef5000 - 00000000bff00000 (usable)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g6 Notebook PC/169B, BIOS F.44 11/14/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00BFEBD000 mask FFFFFFF000 uncachable
[ 0.000000] 3 base 00FFE00000 mask FFFFE00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff00000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff00000 page 4k
[ 0.000000] kernel direct mapping tables up to bff00000 @ bfefd000-bff00000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ 11effe000-11f000000
[ 0.000000] RAMDISK: 365b8000 - 372d4000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000bfef4120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bfef3000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bfedd000 11CF7 (v01 HP INSYDE F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bfc95000 00040
[ 0.000000] ACPI: HPET 00000000bfef2000 00038 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000bfef1000 00084 (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000bfef0000 0003C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000bfeef000 000A5 (v32 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bfedc000 00028 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000bfedb000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 00000000bfeda000 00047 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 00000000bfed9000 00055 (v03 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bfed8000 0072C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bfed6000 0193D (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011eff9000 - 000000011effdfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ae00000-ffff88011dffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfb3f
[ 0.000000] 0: 0x000bfef5 -> 0x000bff00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 912089
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 766850 pages, LIFO batch:31
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 125240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfb3f000 - 00000000bfbbf000
[ 0.000000] PM: Registered nosave memory: 00000000bfbbf000 - 00000000bfebf000
[ 0.000000] PM: Registered nosave memory: 00000000bfebf000 - 00000000bfef5000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011ec00000 s79616 r8192 d22784 u524288
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 896012
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=/dev/sda3 ro vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3503764k/4702208k available (6104k kernel code, 1053852k absent, 144592k reserved, 4880k data, 984k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 29360128 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1896.777 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3793.55 BogoMIPS (lpj=7587108)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004039] Security Framework initialized
[ 0.004055] AppArmor: AppArmor initialized
[ 0.004057] Yama: becoming mindful.
[ 0.004550] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005973] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008504] Mount-cache hash table entries: 256
[ 0.008648] Initializing cgroup subsys cpuacct
[ 0.008654] Initializing cgroup subsys memory
[ 0.008663] Initializing cgroup subsys devices
[ 0.008665] Initializing cgroup subsys freezer
[ 0.008668] Initializing cgroup subsys net_cls
[ 0.008670] Initializing cgroup subsys blkio
[ 0.008676] Initializing cgroup subsys perf_event
[ 0.008708] tseg: 00bff00000
[ 0.008710] CPU: Physical Processor ID: 0
[ 0.008712] CPU: Processor Core ID: 0
[ 0.008715] mce: CPU supports 6 MCE banks
[ 0.011425] ACPI: Core revision 20110413
[ 0.020024] ftrace: allocating 25651 entries in 101 pages
[ 0.024436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066896] CPU0: AMD A4-3305M APU with Radeon(tm) HD Graphics stepping 00
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 9a000
[ 0.156020] Brought up 2 CPUs
[ 0.156023] Total of 2 processors activated (7586.63 BogoMIPS).
[ 0.156490] devtmpfs: initialized
[ 0.156490] PM: Registering ACPI NVS region at bfbbf000 (3145728 bytes)
[ 0.157776] print_constraints: dummy:
[ 0.157799] Time: 13:53:08 Date: 03/14/12
[ 0.157840] NET: Registered protocol family 16
[ 0.157897] Trying to unpack rootfs image as initramfs...
[ 0.158115] Extended Config Space enabled on 0 nodes
[ 0.158137] ACPI: bus type pci registered
[ 0.158262] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.158267] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.167090] PCI: Using configuration type 1 for base access
[ 0.172283] bio: create slab at 0
[ 0.174089] ACPI: EC: Look up EC in DSDT
[ 0.176149] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.180644] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.220095] ACPI: Interpreter enabled
[ 0.220103] ACPI: (supports S0 S3 S4 S5)
[ 0.220129] ACPI: Using IOAPIC for interrupt routing
[ 0.220664] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.220868] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.221125] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.234285] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.234515] ACPI: No dock devices found.
[ 0.234518] HEST: Table not found.
[ 0.234522] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.234677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.234821] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.234825] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.234828] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.234830] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.234833] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.234835] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.234838] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.234840] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.234843] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.234845] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.234848] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.234850] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.234853] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.234855] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.234858] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.234860] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.234863] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
[ 0.234866] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
[ 0.234873] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]
[ 0.234890] pci 0000:00:00.0: [1022:1705] type 0 class 0x000600
[ 0.234931] pci 0000:00:01.0: [1002:9649] type 0 class 0x000300
[ 0.234941] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.234948] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.234955] pci 0000:00:01.0: reg 18: [mem 0xf0500000-0xf053ffff]
[ 0.234991] pci 0000:00:01.0: supports D1 D2
[ 0.235009] pci 0000:00:01.1: [1002:1714] type 0 class 0x000403
[ 0.235018] pci 0000:00:01.1: reg 10: [mem 0xf0544000-0xf0547fff]
[ 0.235063] pci 0000:00:01.1: supports D1 D2
[ 0.235136] pci 0000:00:04.0: [1022:1709] type 1 class 0x000604
[ 0.235183] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.235187] pci 0000:00:04.0: PME# disabled
[ 0.236048] pci 0000:00:11.0: [1022:7804] type 0 class 0x000106
[ 0.236070] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.236081] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.236092] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.236103] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.236114] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.236125] pci 0000:00:11.0: reg 24: [mem 0xf054c000-0xf054c7ff]
[ 0.236178] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[ 0.236193] pci 0000:00:12.0: reg 10: [mem 0xf054b000-0xf054bfff]
[ 0.236273] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[ 0.236440] pci 0000:00:12.2: reg 10: [mem 0xf054a000-0xf054a0ff]
[ 0.237350] pci 0000:00:12.2: supports D1 D2
[ 0.237352] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.237357] pci 0000:00:12.2: PME# disabled
[ 0.237380] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[ 0.237395] pci 0000:00:13.0: reg 10: [mem 0xf0549000-0xf0549fff]
[ 0.237474] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[ 0.237635] pci 0000:00:13.2: reg 10: [mem 0xf0548000-0xf05480ff]
[ 0.238544] pci 0000:00:13.2: supports D1 D2
[ 0.238546] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.238551] pci 0000:00:13.2: PME# disabled
[ 0.238574] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[ 0.238660] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[ 0.238685] pci 0000:00:14.2: reg 10: [mem 0xf0540000-0xf0543fff 64bit]
[ 0.238750] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.238755] pci 0000:00:14.2: PME# disabled
[ 0.238772] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[ 0.238856] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
[ 0.238912] pci 0000:00:15.0: [1022:43a0] type 1 class 0x000604
[ 0.238982] pci 0000:00:15.0: supports D1 D2
[ 0.239012] pci 0000:00:15.1: [1022:43a1] type 1 class 0x000604
[ 0.239083] pci 0000:00:15.1: supports D1 D2
[ 0.239113] pci 0000:00:15.2: [1022:43a2] type 1 class 0x000604
[ 0.239184] pci 0000:00:15.2: supports D1 D2
[ 0.239217] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.239251] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.239281] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.239316] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.239354] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.239384] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.239415] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.239445] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.239582] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
[ 0.239598] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.239624] pci 0000:01:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.239641] pci 0000:01:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.239686] pci 0000:01:00.0: supports D1 D2
[ 0.239688] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.239693] pci 0000:01:00.0: PME# disabled
[ 0.244058] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.244068] pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
[ 0.244072] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.244079] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.244201] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.244206] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.244211] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.244216] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.244220] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.244223] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.244226] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.244228] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.244231] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.244234] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.244236] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.244239] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.244242] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.244245] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.244247] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.244250] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.244253] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.244255] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.244258] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.244261] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.244264] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.244373] pci 0000:00:15.0: PCI bridge to [bus 03-06]
[ 0.244380] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
[ 0.244385] pci 0000:00:15.0: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.244392] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.244807] pci 0000:07:00.0: [1814:5390] type 0 class 0x000280
[ 0.245727] pci 0000:07:00.0: reg 10: [mem 0xf0300000-0xf030ffff]
[ 0.252580] pci 0000:00:15.1: PCI bridge to [bus 07-07]
[ 0.252591] pci 0000:00:15.1: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.252598] pci 0000:00:15.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.252605] pci 0000:00:15.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.252735] pci 0000:08:00.0: [10ec:5209] type 0 class 0x00ff00
[ 0.252759] pci 0000:08:00.0: reg 10: [mem 0xf0200000-0xf0200fff]
[ 0.252883] pci 0000:08:00.0: supports D1 D2
[ 0.252885] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[ 0.252892] pci 0000:08:00.0: PME# disabled
[ 0.260150] pci 0000:00:15.2: PCI bridge to [bus 08-08]
[ 0.260162] pci 0000:00:15.2: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.260168] pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.260175] pci 0000:00:15.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.260210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.260411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.260455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.260489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
[ 0.260521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB2._PRT]
[ 0.260594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.260749] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.260922] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.269926] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.269994] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.270060] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.270124] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.270176] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.270216] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.270256] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.270296] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.270407] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.270422] vgaarb: loaded
[ 0.270423] vgaarb: bridge control possible 0000:00:01.0
[ 0.270606] SCSI subsystem initialized
[ 0.270683] libata version 3.00 loaded.
[ 0.270736] usbcore: registered new interface driver usbfs
[ 0.270748] usbcore: registered new interface driver hub
[ 0.270775] usbcore: registered new device driver usb
[ 0.270861] PCI: Using ACPI for IRQ routing
[ 0.273195] PCI: pci_cache_line_size set to 64 bytes
[ 0.273333] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.273336] reserve RAM buffer: 00000000bfb3f000 - 00000000bfffffff
[ 0.273339] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff
[ 0.273342] reserve RAM buffer: 000000011f000000 - 000000011fffffff
[ 0.273446] NetLabel: Initializing
[ 0.273448] NetLabel: domain hash size = 128
[ 0.273450] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273462] NetLabel: unlabeled traffic allowed by default
[ 0.273555] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.273560] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.275581] Switching to clocksource hpet
[ 0.275913] Switched to NOHz mode on CPU #0
[ 0.275747] Switched to NOHz mode on CPU #1
[ 0.278505] AppArmor: AppArmor Filesystem Enabled
[ 0.278542] pnp: PnP ACPI init
[ 0.278563] ACPI: bus type pnp registered
[ 0.278702] pnp 00:00: [bus 00-ff]
[ 0.278706] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.278708] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.278711] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.278713] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.278715] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.278718] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.278720] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.278722] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.278725] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.278727] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.278730] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.278732] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.278734] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.278737] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.278739] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.278741] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.278744] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[ 0.278746] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[ 0.278749] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.278817] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.278865] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.278868] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.278870] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.278872] pnp 00:01: [mem 0xfed80000-0xfed80fff]
[ 0.278874] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.278933] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.278936] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.278940] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.278943] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.278947] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.278951] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279087] pnp 00:02: [irq 0 disabled]
[ 0.279100] pnp 00:02: [irq 8]
[ 0.279102] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.279129] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.279186] pnp 00:03: [io 0x0000-0x000f]
[ 0.279191] pnp 00:03: [io 0x0081-0x008f]
[ 0.279194] pnp 00:03: [io 0x00c0-0x00df]
[ 0.279196] pnp 00:03: [dma 4]
[ 0.279227] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.279235] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.279287] pnp 00:04: [irq 13]
[ 0.279320] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.279405] pnp 00:05: [io 0x0070-0x0071]
[ 0.279436] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.279444] pnp 00:06: [io 0x0061]
[ 0.279477] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.279487] pnp 00:07: [io 0x0060]
[ 0.279489] pnp 00:07: [io 0x0064]
[ 0.279541] pnp 00:07: [irq 1]
[ 0.279574] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.279638] pnp 00:08: [irq 12]
[ 0.279676] pnp 00:08: Plug and Play ACPI device, IDs SYN1e49 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.279687] pnp 00:09: [io 0x0010-0x001f]
[ 0.279689] pnp 00:09: [io 0x002e-0x002f]
[ 0.279691] pnp 00:09: [io 0x0072-0x0073]
[ 0.279693] pnp 00:09: [io 0x0080]
[ 0.279696] pnp 00:09: [io 0x00b0-0x00b1]
[ 0.279698] pnp 00:09: [io 0x0092]
[ 0.279700] pnp 00:09: [io 0x0400-0x04cf]
[ 0.279702] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.279704] pnp 00:09: [io 0x04d6]
[ 0.279706] pnp 00:09: [io 0x0680-0x06ff]
[ 0.279708] pnp 00:09: [io 0x077a]
[ 0.279710] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.279713] pnp 00:09: [io 0x0c14]
[ 0.279715] pnp 00:09: [io 0x0c50-0x0c52]
[ 0.279717] pnp 00:09: [io 0x0c6c]
[ 0.279719] pnp 00:09: [io 0x0c6f]
[ 0.279721] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 0.279723] pnp 00:09: [io 0x0840-0x0847]
[ 0.279779] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.279783] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.279786] system 00:09: [io 0x04d6] has been reserved
[ 0.279789] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.279792] system 00:09: [io 0x077a] has been reserved
[ 0.279795] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.279798] system 00:09: [io 0x0c14] has been reserved
[ 0.279801] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 0.279804] system 00:09: [io 0x0c6c] has been reserved
[ 0.279806] system 00:09: [io 0x0c6f] has been reserved
[ 0.279809] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 0.279813] system 00:09: [io 0x0840-0x0847] has been reserved
[ 0.279816] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279864] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.279867] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[ 0.279915] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.279919] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.279922] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.282675] pnp: PnP ACPI: found 11 devices
[ 0.282681] ACPI: ACPI bus type pnp unregistered
[ 0.288987] PCI: max bus depth: 1 pci_try_num: 2
[ 0.289057] pci 0000:00:15.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.289062] pci 0000:00:15.2: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.289066] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.289069] pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
[ 0.289073] pci 0000:00:04.0: bridge window [mem disabled]
[ 0.289077] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.289083] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.289085] pci 0000:00:14.4: bridge window [io disabled]
[ 0.289157] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.289161] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.289169] pci 0000:00:15.0: PCI bridge to [bus 03-06]
[ 0.289173] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
[ 0.289179] pci 0000:00:15.0: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.289184] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.289191] pci 0000:00:15.1: PCI bridge to [bus 07-07]
[ 0.289193] pci 0000:00:15.1: bridge window [io disabled]
[ 0.289198] pci 0000:00:15.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.289202] pci 0000:00:15.1: bridge window [mem pref disabled]
[ 0.289209] pci 0000:00:15.2: PCI bridge to [bus 08-08]
[ 0.289212] pci 0000:00:15.2: bridge window [io 0x1000-0x1fff]
[ 0.289218] pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.289223] pci 0000:00:15.2: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.289251] pci 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.289256] pci 0000:00:04.0: setting latency timer to 64
[ 0.289268] pci 0000:00:15.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.289273] pci 0000:00:15.0: setting latency timer to 64
[ 0.289280] pci 0000:00:15.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.289284] pci 0000:00:15.1: setting latency timer to 64
[ 0.289291] pci 0000:00:15.2: enabling device (0006 -> 0007)
[ 0.289295] pci 0000:00:15.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.289299] pci 0000:00:15.2: setting latency timer to 64
[ 0.289304] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.289306] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.289309] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.289311] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.289314] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.289316] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.289319] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.289321] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.289323] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.289326] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.289328] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.289330] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.289333] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.289335] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.289338] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.289340] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.289343] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.289345] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.289348] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.289351] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.289353] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.289356] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.289358] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.289360] pci_bus 0000:02: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.289363] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.289365] pci_bus 0000:02: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.289367] pci_bus 0000:02: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.289370] pci_bus 0000:02: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.289372] pci_bus 0000:02: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.289375] pci_bus 0000:02: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.289377] pci_bus 0000:02: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.289379] pci_bus 0000:02: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.289382] pci_bus 0000:02: resource 17 [mem 0x000ec000-0x000effff]
[ 0.289384] pci_bus 0000:02: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.289387] pci_bus 0000:02: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.289389] pci_bus 0000:02: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.289392] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.289394] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.289397] pci_bus 0000:03: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.289399] pci_bus 0000:07: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.289402] pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
[ 0.289404] pci_bus 0000:08: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.289407] pci_bus 0000:08: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.289472] NET: Registered protocol family 2
[ 0.289688] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.291179] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.294044] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.294432] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.294436] TCP reno registered
[ 0.294453] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.294493] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.294640] NET: Registered protocol family 1
[ 0.294658] pci 0000:00:01.0: Boot video device
[ 0.356169] PCI: CLS 64 bytes, default 64
[ 0.356174] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.356178] Placing 64MB software IO TLB between ffff8800bbb3f000 - ffff8800bfb3f000
[ 0.356181] software IO TLB at phys 0xbbb3f000 - 0xbfb3f000
[ 0.356201] Simple Boot Flag at 0x44 set to 0x1
[ 0.356555] audit: initializing netlink socket (disabled)
[ 0.356567] type=2000 audit(1331733188.356:1): initialized
[ 0.388407] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.406628] VFS: Disk quotas dquot_6.5.2
[ 0.406689] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.407393] fuse init (API version 7.16)
[ 0.407484] msgmni has been set to 6843
[ 0.407880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.407955] io scheduler noop registered
[ 0.407957] io scheduler deadline registered
[ 0.408076] io scheduler cfq registered (default)
[ 0.408384] pcieport 0000:00:15.2: setting latency timer to 64
[ 0.408449] pcieport 0000:00:15.2: irq 40 for MSI/MSI-X
[ 0.408544] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.408588] pciehp 0000:00:15.2:pcie04: HPC vendor_id 1022 device_id 43a2 ss_vid 1022 ss_did 0
[ 0.408625] pciehp 0000:00:15.2:pcie04: service driver pciehp loaded
[ 0.408632] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.469970] Freeing initrd memory: 13424k freed
[ 0.665234] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.665926] ACPI: AC Adapter [AC] (off-line)
[ 0.665992] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.665997] ACPI: Power Button [PWRB]
[ 0.666050] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.666065] ACPI: Lid Switch [LID]
[ 0.666096] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.666099] ACPI: Power Button [PWRF]
[ 0.666169] ACPI: acpi_idle registered with cpuidle
[ 0.672439] ACPI: Invalid active0 threshold
[ 0.674331] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.674335] ACPI: Thermal Zone [TZ0] (0 C)
[ 0.676239] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.676245] ACPI: Thermal Zone [TZ1] (0 C)
[ 0.676289] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.676308] ERST: Table is not found!
[ 0.692543] ACPI: Battery Slot [BAT0] (battery present)
[ 0.736968] Linux agpgart interface v0.103
[ 0.737769] brd: module loaded
[ 0.738132] loop: module loaded
[ 0.738485] Fixed MDIO Bus: probed
[ 0.738502] PPP generic driver version 2.4.2
[ 0.738541] tun: Universal TUN/TAP device driver, 1.6
[ 0.738542] tun: (C) 1999-2004 Max Krasnyansky
[ 0.738607] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.738686] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.738794] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.738823] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.738832] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.738857] QUIRK: Enable AMD PLL fix
[ 0.738868] ehci_hcd 0000:00:12.2: debug port 1
[ 0.738890] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf054a000
[ 0.748258] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.748420] hub 1-0:1.0: USB hub found
[ 0.748424] hub 1-0:1.0: 5 ports detected
[ 0.748585] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.748609] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.748643] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.748651] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.748673] ehci_hcd 0000:00:13.2: debug port 1
[ 0.748687] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0548000
[ 0.760256] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.760432] hub 2-0:1.0: USB hub found
[ 0.760436] hub 2-0:1.0: 5 ports detected
[ 0.760552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.760616] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.760641] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.760672] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.760700] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf054b000
[ 0.820370] hub 3-0:1.0: USB hub found
[ 0.820425] hub 3-0:1.0: 5 ports detected
[ 0.820497] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.820521] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.820552] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.820569] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0549000
[ 0.880373] hub 4-0:1.0: USB hub found
[ 0.880428] hub 4-0:1.0: 5 ports detected
[ 0.880497] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.880557] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.888498] i8042: Detected active multiplexing controller, rev 1.1
[ 0.891003] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.891011] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.891048] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.891068] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.891088] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.891165] mousedev: PS/2 mouse device common for all mice
[ 0.891274] rtc_cmos 00:05: RTC can wake from S4
[ 0.891356] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.891379] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.891466] device-mapper: uevent: version 1.0.3
[ 0.891530] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.891626] cpuidle: using governor ladder
[ 0.891776] cpuidle: using governor menu
[ 0.891778] EFI Variables Facility v0.08 2004-May-17
[ 0.892078] TCP cubic registered
[ 0.892174] NET: Registered protocol family 10
[ 0.892618] NET: Registered protocol family 17
[ 0.892638] Registering the dns_resolver key type
[ 0.892756] PM: Hibernation image not present or could not be loaded.
[ 0.892768] registered taskstats version 1
[ 0.907802] Magic number: 4:749:887
[ 0.907934] rtc_cmos 00:05: setting system clock to 2012-03-14 13:53:09 UTC (1331733189)
[ 0.907945] powernow-k8: Found 1 AMD A4-3305M APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[ 0.907962] powernow-k8: Core Performance Boosting: on.
[ 0.908038] powernow-k8: 0 : pstate 0 (1900 MHz)
[ 0.908040] powernow-k8: 1 : pstate 1 (1800 MHz)
[ 0.908041] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 0.908042] powernow-k8: 3 : pstate 3 (1400 MHz)
[ 0.908044] powernow-k8: 4 : pstate 4 (1200 MHz)
[ 0.908045] powernow-k8: 5 : pstate 5 (1000 MHz)
[ 0.908047] powernow-k8: 6 : pstate 6 (800 MHz)
[ 0.908235] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.908239] EDD information not available.
[ 0.910002] Freeing unused kernel memory: 984k freed
[ 0.910319] Write protecting the kernel read-only data: 10240k
[ 0.910645] Freeing unused kernel memory: 20k freed
[ 0.915486] Freeing unused kernel memory: 1400k freed
[ 0.931935] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.940787] udevd[81]: starting version 173
[ 1.072110] usb 2-2: new high speed USB device number 2 using ehci_hcd
[ 1.080645] ahci 0000:00:11.0: version 3.0
[ 1.080719] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.080775] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
[ 1.080841] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.080846] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.087915] scsi0 : ahci
[ 1.090483] scsi1 : ahci
[ 1.090725] ata1: SATA max UDMA/133 abar m2048@0xf054c000 port 0xf054c100 irq 41
[ 1.090729] ata2: SATA max UDMA/133 abar m2048@0xf054c000 port 0xf054c180 irq 41
[ 1.092315] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.092360] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.092404] r8169 0000:01:00.0: setting latency timer to 64
[ 1.092503] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
[ 1.092941] r8169 0000:01:00.0: eth0: RTL8105e at 0xffffc90000670000, 78:e3:b5:66:f8:8b, XID 00a00000 IRQ 42
[ 1.376249] Refined TSC clocksource calibration: 1896.551 MHz.
[ 1.376267] Switching to clocksource tsc
[ 1.580270] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.584273] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.586417] ata1.00: ATA-8: ST320LM000 HM321HI, 2AJ10003, max UDMA/133
[ 1.586422] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.592528] ata1.00: configured for UDMA/133
[ 1.593008] scsi 0:0:0:0: Direct-Access ATA ST320LM000 HM321 2AJ1 PQ: 0 ANSI: 5
[ 1.593179] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.593270] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.593307] sd 0:0:0:0: [sda] Write Protect is off
[ 1.593310] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.593326] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.599111] ata2.00: ATAPI: hp DVD-RAM UJ8B1, H.03, max UDMA/100
[ 1.613707] sda: sda1 sda2 sda3
[ 1.615075] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.622775] ata2.00: configured for UDMA/100
[ 1.641814] scsi 1:0:0:0: CD-ROM hp DVD-RAM UJ8B1 H.03 PQ: 0 ANSI: 5
[ 1.661561] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.661568] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.661705] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.661774] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.935585] EXT3-fs (sda3): recovery required on readonly filesystem
[ 1.935596] EXT3-fs (sda3): write access will be enabled during recovery
[ 1.948716] EXT3-fs: barriers not enabled
[ 4.743666] kjournald starting. Commit interval 5 seconds
[ 4.743774] EXT3-fs (sda3): orphan cleanup on readonly fs
[ 4.743786] ext3_orphan_cleanup: deleting unreferenced inode 164101
[ 4.743819] ext3_orphan_cleanup: deleting unreferenced inode 164081
[ 4.743833] ext3_orphan_cleanup: deleting unreferenced inode 164073
[ 4.743840] ext3_orphan_cleanup: deleting unreferenced inode 164072
[ 4.743848] ext3_orphan_cleanup: deleting unreferenced inode 1016537
[ 4.743857] ext3_orphan_cleanup: deleting unreferenced inode 1016536
[ 4.743863] ext3_orphan_cleanup: deleting unreferenced inode 1016535
[ 4.743869] ext3_orphan_cleanup: deleting unreferenced inode 1016528
[ 4.743875] ext3_orphan_cleanup: deleting unreferenced inode 1016525
[ 4.743881] ext3_orphan_cleanup: deleting unreferenced inode 1016522
[ 4.743887] EXT3-fs (sda3): 10 orphan inodes deleted
[ 4.743890] EXT3-fs (sda3): recovery complete
[ 4.786697] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 19.769655] udevd[294]: starting version 173
[ 19.798352] lp: driver loaded but no devices found
[ 19.841974] EXT3-fs (sda3): using internal journal
[ 19.906717] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 19.952707] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 19.952714] Disabling lock debugging due to kernel taint
[ 20.050236] wmi: Mapper loaded
[ 20.124910] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 20.160494] acpi device:01: registered as cooling_device2
[ 20.160594] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 20.160679] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.191819] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.273616] Initializing Realtek PCIE storage driver...
[ 20.273720] rts_pstor 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.274907] cfg80211: Calling CRDA to update world regulatory domain
[ 20.283205] Resource length: 0x1000
[ 20.283248] Original address: 0xf0200000, remapped address: 0xffffc9000063a000
[ 20.283254] pci->irq = 16
[ 20.283257] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 16
[ 20.283307] rts_pstor 0000:08:00.0: setting latency timer to 64
[ 20.283313] scsi2 : SCSI emulation for PCI-Express Mass Storage devices
[ 20.309617] rt2800pci 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 20.309650] rt2800pci 0000:07:00.0: setting latency timer to 64
[ 20.318245] [fglrx] Maximum main memory to use for locked dma buffers: 3284 MBytes.
[ 20.318276] [fglrx] vendor: 1002 device: 9649 count: 1
[ 20.322798] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 20.322816] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 20.322823] pci 0000:00:01.0: setting latency timer to 64
[ 20.323467] [fglrx] Kernel PAT support is enabled
[ 20.323494] [fglrx] module loaded - fglrx 8.95.3 [Feb 14 2012] with 1 minors
[ 20.329881] Linux video capture interface: v2.00
[ 20.330628] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b249)
[ 20.334228] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334233] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334236] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334239] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334242] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334245] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334247] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334249] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334252] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334254] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334256] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334259] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334261] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334264] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334266] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334269] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334271] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334273] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334276] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334278] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334280] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334283] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334285] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334288] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334290] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334293] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.334295] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 20.334298] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 20.368751] input: HP Webcam-101 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input5
[ 20.368823] usbcore: registered new interface driver uvcvideo
[ 20.368825] USB Video Class driver (v1.1.0)
[ 20.374375] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 20.374440] HDA Intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 20.374467] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 20.402398] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 20.402544] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[ 20.402774] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.481159] input: HD-Audio Generic Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 20.481304] input: HD-Audio Generic HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 20.510428] rts_pstor: waiting for device to settle before scanning
[ 20.579779] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579785] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579788] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579791] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579794] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579796] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579799] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579801] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579803] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579806] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579808] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579811] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579813] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579816] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579818] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579820] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579823] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579825] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579827] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579830] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579832] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579835] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579837] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579840] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579842] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579844] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579847] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 20.579849] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 20.579853] cfg80211: World regulatory domain updated:
[ 20.579854] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.579857] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.579860] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.579862] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.579865] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.579868] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.774956] r8169 0000:01:00.0: eth0: link down
[ 20.775447] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.775543] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.776349] Registered led device: rt2800pci-phy0::radio
[ 20.776370] Registered led device: rt2800pci-phy0::assoc
[ 20.776388] Registered led device: rt2800pci-phy0::quality
[ 20.848495] init: failsafe main process (803) killed by TERM signal
[ 20.898167] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[ 20.941423] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.968759] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 21.077780] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 21.117319] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 21.508576] rts_pstor: device scan complete
[ 21.508918] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 21.509072] Bad LUN (0:1)
[ 21.525198] Bad target number (1:0)
[ 21.536431] Bad target number (2:0)
[ 21.540751] Bad target number (3:0)
[ 21.544714] Bad target number (4:0)
[ 21.548583] Bad target number (5:0)
[ 21.564553] Bad target number (6:0)
[ 21.568713] Bad target number (7:0)
[ 21.572808] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 21.572938] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 22.648572] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 22.648576] vesafb: scrolling: redraw
[ 22.648579] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 22.649319] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005d80000, using 4160k, total 4160k
[ 22.649516] Console: switching to colour frame buffer device 170x48
[ 22.653388] fb0: VESA VGA frame buffer device
[ 22.677017] ppdev: user-space parallel port driver
[ 23.570300] init: apport pre-start process (1123) terminated with status 1
[ 23.603332] init: apport post-stop process (1155) terminated with status 1
[ 23.735560] Bluetooth: Core ver 2.16
[ 23.735603] NET: Registered protocol family 31
[ 23.735605] Bluetooth: HCI device and connection manager initialized
[ 23.735609] Bluetooth: HCI socket layer initialized
[ 23.735611] Bluetooth: L2CAP socket layer initialized
[ 23.736425] Bluetooth: SCO socket layer initialized
[ 23.739324] Bluetooth: RFCOMM TTY layer initialized
[ 23.739332] Bluetooth: RFCOMM socket layer initialized
[ 23.739335] Bluetooth: RFCOMM ver 1.11
[ 23.765206] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.765210] Bluetooth: BNEP filters: protocol multicast
[ 23.769627] [fglrx] ATIF platform detected with notification ID: 0x81
[ 24.006514] wlan0: authenticate with 00:18:4d:8c:9c:48 (try 1)
[ 24.008160] wlan0: authenticated
[ 24.008567] wlan0: associate with 00:18:4d:8c:9c:48 (try 1)
[ 24.011028] wlan0: RX AssocResp from 00:18:4d:8c:9c:48 (capab=0x431 status=0 aid=1)
[ 24.011033] wlan0: associated
[ 24.011876] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.549368] fglrx_pci 0000:00:01.0: irq 44 for MSI/MSI-X
[ 24.550328] [fglrx] Firegl kernel thread PID: 1291
[ 24.550471] [fglrx] Firegl kernel thread PID: 1292
[ 24.550635] [fglrx] Firegl kernel thread PID: 1293
[ 24.550766] [fglrx] IRQ 44 Enabled
[ 24.721867] [fglrx] Gart USWC size:1076 M.
[ 24.721872] [fglrx] Gart cacheable size:425 M.
[ 24.721878] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 24.721881] [fglrx] Reserved FB block: Unshared offset:fca1000, size:35f000
[ 24.721883] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 24.880149] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.890190] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 34.368119] wlan0: no IPv6 routers present